STEERING GEAR AND RUDDER
One electro-hydraulic double ram, four cylinder steering gear drives one semi-spade rudder with two pintles. Maker Yoo-Won Ind., Ltd & Hyundai Heavy Ind. Co., Ltd.

WINCHES
Two electro-hydraulic driven combined anchor windlass/mooring winches and six electro-hydraulic driven mooring winches fitted with wires of 38 mm diameter and 280 meter length, with break holding capacity of at first layer of 64.0 tonnes. Brake test kits are provided. Windlass/mooring winch fwd. 2 x 20 tonnes at 15 m/min. Mooring winch fwd 1 x 20 tonnes at 15 m/min. Mooring winch mid. 2 x 20 tonnes at 15 m/min. Mooring winch aft. 3 x 20 tonnes at 15 m/min. Length of port anchor chain is 12 shackles Length of starboard anchor chain is 13 shackles

SINGLE POINT MOORING FACILITY
Two bow chain stoppers of "tongue" type capable of accepting 76mm(3") chain link through a bow chock opening of 450mm x 600mm. Safe working load is 200 tonnes.

HOSE HANDLING CRANE
One hose handling crane of 15 tonnes lifting capacity, electro-hydraulic design is installed at the manifold area.

PROVISION CRANES
Two electro-hydraulic provision cranes for 5 tonnes/ 2 tonnes safe working load. 5 tonnes S.W.L provision crane installed on fwd part of engine casing(port side) and 2 tonnes S.W.L provision crane installed on upper deck(stb'd side) respectively.